2024 Ohio Reef Frag Swap

2024 flyer

Author Topic: Need help Moding a Kangaroo Dosing Pump  (Read 1807 times)

0 Members and 1 Guest are viewing this topic.

Offline JoeAyers

  • Posts: 1,148
Need help Moding a Kangaroo Dosing Pump
« on: April 24, 2009, 09:59:32 »
Need a soldering expert to help with the mod. I'm terrible and don't want to short circuit the control board. I obviously will not hold you liable if you screw it up  :laugh:

Offline JoeAyers

  • Posts: 1,148
Re: Need help Moding a Kangaroo Dosing Pump
« Reply #1 on: April 24, 2009, 10:34:15 »
Okay. New question. Anyone know how to figure out how this circuit board works?  Just opened it up and the board is totally different than the older style pumps so the directions on thereeftank.com don't really jive.

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Re: Need help Moding a Kangaroo Dosing Pump
« Reply #2 on: April 24, 2009, 16:51:30 »
You got a link to the mod to see what you need soldered? I should have everything you need.
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz


 

Powered by EzPortal