Ohio Reef

Reef Discussion => Do It Yourself => Topic started by: UDJustin on January 28, 2009, 23:50:13

Title: Autodesk Inventor
Post by: UDJustin on January 28, 2009, 23:50:13

So I have been wanting to get a calcium reactor and I have seen plenty of DIY designs out on the web... being that I work at Aquariums Etc. Joel has a reactor there that I happened to look at and grab a few quick measurements off of. So I have been trying to throw a design together and this is my start I guess its not done by any means but I thought I would post a pic up that i took with my cell phone. I dont think the site would support inventor files so this is why I posted the pic from my cell phone.

(https://ohioreef.com/proxy.php?request=http%3A%2F%2Fi305.photobucket.com%2Falbums%2Fnn234%2Fudjustin%2F0128092341.jpg&hash=a95ce4f029c443ed2b260c1dce952d2bc53915a2)

Title: Re: Autodesk Inventor
Post by: cyberwollf on January 29, 2009, 08:01:28

You can also do a print screen (Fn + insert. on my laptop) paste it in MSPaint or something and save JPG