90 gal tank-custom black solid wood stand with two doors and no annoying center brace
-90 gallon tank w/predrilled off set center overflow w/stand pipe (back painted black)
-euro reef rs 80 in sump skimmer.
-ocean motion 4-way 1 1/2" intake 4 1" outlets
-reef flow dart pump 3600 gph max flow
-reef keeper 2 controller (needs new temp probe)
-200 watt heater
-eSumps 36" acrylic reef sump w/filter sock
-two little fishes phosphate reactor with maxi jet feed pump
-3" thick sand bed (Carib sea sea floor special grade reef sand)
-live rock (pukani and other mixed Fiji live rock)
-aquatinics 48" T5 halide hood
Powder coated aluminum hood with two extenders legs
Two 250 watt mogule halides
Two 95 watt T5 bulbs
Upgraded glass splatter shield
Two 4" Fans on the end of the fixture. Fans turn on and off with halides.
Fixture uses one combined ballast with cooling veins on the top.
Halides and T5 have independent controls.
-Pan world 50px return pump
-6 1" adjustable omni flex nozzles made by ocean motions in tank
-wavy sea oscillation return (motor does not operate was installed too low by me causing the electronics to fail due to water infiltration) still functions as an adjustable directional sump return.
-schedule 80 bulk heads 2-2", 6-1", 3-3/4"
- George Fisher AKA +GF+ True Union Ball Valves 1-2", 1-1 1/2", 4-1", 1 3/4".
Tank modificationsThe tank back was custom drilled for multiple pipes. There is a 3/4 overflow drain drilled into the back wall of the overflow chamber. This is for safety incase something happens to the primary overflow this has it's own plumbing drain that dumps into the sump bypassing the stand pipe and filter sock.
There is a closed loop drilled in to the back of the tank. The loop starts with two 2" intakes drilled in the back wall. It returns with 6 1" returns. There is an extra 3/4" drain in the back of the tank. This was placed there for water changes. In total there are 10 custom drilled holes in the back of the tank. All of the holes were professionally drilled with a carbide whole saw and speciallty drill press. Proper spacing came of the holes was well planned out as to not weaken the integrity of the tank.
There is around $1,000 in plumbing in this tank!
Total I have in this tank is about $5,000.
It's been running for about 4 years.
All decent offers will be considered.
Sump full of equipment
Home
Help
Login
Register
