Author Topic: Diy kalk reactor. (Read 6997 times)

slandis3 · « **on:** April 03, 2009, 11:28:10 »

Ok i am going to help dstyles put together a diy kalk reactor during Easter weekend. Were going to use pvc as the body and a maxi jet for a pump. If any one else wants to go in and make one let me know. I am going today to get prices on all the stuff needed to make them. Just let me know.It will look something like this but a maxi jet instead of a mag drive, unless you want to use a mag drive or similar pump.

slandis3 · « **Reply #1 on:** April 03, 2009, 11:38:17 »

also i will be building a auto top off as well. If anyone wants one let me know. I will need to know how many relays and float switches to order.

slandis3 · « **Reply #2 on:** April 03, 2009, 16:01:41 »

relays are about $7 and the float switches are about $12 + shipping

jeremyt · « **Reply #3 on:** April 03, 2009, 16:41:33 »

i would like to get a ato for my setup, can pay whenever let me know if you can grab me one. please and thanks

slandis3 · « **Reply #4 on:** April 03, 2009, 17:09:58 »

i will need to know before monday how many people woulld like to have one. That way i can order them as well as get a final price on shipping for everything.

Dstyles · « **Reply #5 on:** April 03, 2009, 21:27:15 »

You know I am in, correct. I want one of each.

jeblin · « **Reply #6 on:** April 03, 2009, 21:55:05 »

I am interested in one of each depending on final pricing. Just let me know. Thanks,

Jerry

slandis3 · « **Reply #7 on:** April 06, 2009, 11:29:16 »

ok the top off will consist of a float switch,relay, extension cord,12v power supply. The extension cord can be bought for about $5. the 12v power supply should be about $10. But you may have one laying around the house somewhere. So if i go buy everything i would say about $35. I am going to go and get the final prices on the kalk reactor tomorrow. I will have a price on the cord then as well. Maybe even find the power supply while im there. So i am going to order the float switches tomorrow so i will need to know who all wants in tonight if possible.

Amstar · « **Reply #8 on:** April 06, 2009, 11:36:54 »

with the kalk reactor.. will we be able to run our ATO through it?

slandis3 · « **Reply #9 on:** April 06, 2009, 11:57:18 »

yep. that's how i run mine. I have a can of water with the pump that my ato controls in it. When it kicks on it feeds the kalk reactor.

slandis3 · « **Reply #10 on:** April 06, 2009, 12:12:31 »

ok i have to order the relays no later than tomorrow in order to get them by friday. If anyone wants me to order them one for something else let me know. Its a 12v spdt relay. Same with the float switch. I am planning on putting these together saturday so the will be available for pick up then.

rayviv · « **Reply #11 on:** April 06, 2009, 14:16:45 »

OK, Hope you guys dont mind if I jump in. I'm a newbe @ this and have been seeking info on dosing and even tho I've not started yet I,m sure I will to and need knowledge. I know someone who just mixes kalkwasser and adds it but I believe A doser would be the way 2 go. Is a kalk reactor the same as a doser? And is it (kalk) the first thing that I will be adding? I dont think Ill need to dose for a while.
Sincerely, Ray

slandis3 · « **Reply #12 on:** April 06, 2009, 17:15:59 »

No this is not a doser. This when used with an auto top off, will allow you to add small amounts of kalk water to your tank as the water evaporates. I have been using this method for about 2 years now. I dont dose anything and that works well for me. This is very simple to use and setup. On a side note, anyone that wants an auto top off. i need to know how long of a bracket to make. I need to know what the measurment is from the top of your sump to the top of the water lever in your sump. This way i can make custom brackets for eveyone.

rayviv · « **Reply #13 on:** April 06, 2009, 17:35:45 »

If its ok then put me down for one also. Let me know how to pay you 4 it. I'll send the measurement of water level im sump when your ready for it. Ray

slandis3 · « **Reply #14 on:** April 06, 2009, 17:38:28 »

i need the measurments no later thn tomorrow. i would like to start on them tonight

slandis3 · « **Reply #15 on:** April 06, 2009, 17:54:24 »

ok well thanks to scott i found a place where i might be able to get some of the stuff cheaper even with shipping cost. So as of right now i have 5 people wanting the ato so for the relay, float switch, and 12v power pack it would be 23.28 than all that is needed is a extension cord which i will have the price on that tomorrow. Aslo i need to know if anyone has height limits. That way i know how tall to to make the reactors. If we get enough people wanting ato's we can save shipping as well.

as of right now i have

dstyles    ato-kalk reactor
jeremyt    ato
jeblin ato-kalk reactor
rayviv    ato - kalk reactor
udflyer00    ato
udjustin ato

UDflyer00 · « **Reply #16 on:** April 06, 2009, 17:57:49 »

1 ATO

slandis3 · « **Reply #17 on:** April 06, 2009, 18:04:58 »

ok actually we did hit the $100 mark so it will be 22.57 im just not sure if it will get here buy friday or not. I will let everyone know tomorrow when i call them. If we dont we may have to wait untill next weekend to build them. This will save about $6 a unit. Anyone thats would like to see how i have mine setup is more than welcome to come out and take a look

ohioreef · « **Reply #18 on:** April 07, 2009, 10:24:22 »

Mike,

How much for a reactor?

slandis3 · « **Reply #19 on:** April 07, 2009, 10:34:46 »

ok auto top off parts have been ordered. I will have a total price on the reactors today. Im heading to menards to get a list now

Amstar · « **Reply #20 on:** April 07, 2009, 10:57:12 »

I maybe interested in a reactor depending on the price

ohioreef · « **Reply #21 on:** April 07, 2009, 11:36:28 »

I will send you a max height for my application when I get home tonight.

slandis3 · « **Reply #22 on:** April 07, 2009, 12:27:26 »

ok the total price of the ato is $23.59

the reactor to make one 2' tall with the cap and bottom $11.85. now this price does not include the parts to hook up the mixing pump. That will depend on what pump you want to use for example. If you use a mag drive style pump. the total price would be $17.35. if you use something like a maxi jet 1200 it would be $17.41. These prices will depend on what size in and out our pump has. I need to know by Friday who wants one and what pump you are wanting to use. I figure Ill make them all 2' tall to make it easy for everyone unless you need one smaller. The only thing i forgot to include was the price of pvc glue. So add $1.00 to the final price to cover the glue We'll use on these.

ohioreef · « **Reply #23 on:** April 07, 2009, 13:24:31 »

What day were you planning on doing this?

slandis3 · « **Reply #24 on:** April 07, 2009, 13:26:42 »

saturday

Dstyles · « **Reply #25 on:** April 07, 2009, 18:34:18 »

Saturday afternoon I hope.

slandis3 · « **Reply #26 on:** April 07, 2009, 18:34:57 »

yes i would say sometime after 1pm

jeremyt · « **Reply #27 on:** April 08, 2009, 10:05:24 »

just noticed the post about ato height, my sump is a standard 55 gal 48lx12wx19h my water level is only 6-8 in. off bottom, will measure exatly the water level when i get home (at work). thanks for doing this for everyone, if you need any help with anything let me know.

slandis3 · « **Reply #28 on:** April 08, 2009, 10:08:09 »

I am making the brackets adjustable that way you can change it if needed later down the road.

slandis3 · « **Reply #29 on:** April 08, 2009, 14:21:39 »

Ok im going to start making these saturday around 1 pm so anyone that would like to come out and watch/build your own is more that welcome.

jeremyt · « **Reply #30 on:** April 08, 2009, 16:07:23 »

i am down for that (help/build my own)

slandis3 · « **Reply #31 on:** April 08, 2009, 19:03:45 »

Ok so here is the final list. I am going Friday to buy the parts for the reactors so if anyone else wants one or dosn't want one please let me know no later than Thursday night. I am going to set the reactors up fo maxi jet pumps ( not included ) so if anyone wants to bring one with them or if you are running a different pump please let me know so I know what fittings to get.

Amstar Kalk reactor
Ohioreef Kalk reacor
Dstyles Kalk reactor/ato
Jeremyt Ato
Jeblin Kalk reactor/ato
Rayviv Kalk reactor/ ato
udflyer00 Ato
Udjustin Ato
Chefx123 Kalk reactor/ato

jeblin · « **Reply #32 on:** April 08, 2009, 20:19:34 »

Sounds good to me. Thanks again,

Jerry

Dstyles · « **Reply #33 on:** April 08, 2009, 20:22:42 »

I will call you right before I am headed your way. Thanks a million...

slandis3 · « **Reply #34 on:** April 08, 2009, 20:48:05 »

Well I guess I should post my Address. That might make it a little easer to find the lace

65 Kiser dr
Tipp city OH 45371

jeremyt · « **Reply #35 on:** April 09, 2009, 09:45:42 »

if it is not too late can you put me down for a reactor also. if you got the parts already dont worry about it. also what maxi jet would you suggest 1200?

slandis3 · « **Reply #36 on:** April 09, 2009, 12:38:04 »

yes and yes. im buying the parts tomorrow. I am going to set them up for maxi jet 1200's to make it easy for everyone.

jeremyt · « **Reply #37 on:** April 11, 2009, 10:25:43 »

still on for 1?....if so i can come then

slandis3 · « **Reply #38 on:** April 11, 2009, 10:28:20 »

Quote from: jeremyt on April 11, 2009, 10:25:43

still on for 1?....if so i can come then

Yep

jeremyt · « **Reply #39 on:** April 13, 2009, 18:38:10 »

thanks again for making all of the atos and kaulk reactors. it was good to meet everyone and super nice tank man

lazylivin · « **Reply #40 on:** April 14, 2009, 00:25:01 »

Lets see some pics

Dstyles · « **Reply #41 on:** April 14, 2009, 08:06:21 »

Thanks again Mike. I love my ATO. And ditto, it is great to be able to put a face the handle.

jeremyt · « **Reply #42 on:** April 14, 2009, 11:10:26 »

Quote from: Lazylivin on April 14, 2009, 00:25:01

Lets see some pics

i would but im having problems posting pics, keep getting internal server error. i plan to start a new thread to see if someone knows what the problem is.

slandis3 · « **Reply #43 on:** April 14, 2009, 11:11:34 »

You need to make the pics smaller.

jeremyt · « **Reply #44 on:** April 14, 2009, 11:25:35 »

thought it had something to do with that. ever since they changed the pic sizing it hasnt worked. i will figure it out when i get off work. thanks mike.

jeremyt · « **Reply #45 on:** April 18, 2009, 18:14:16 »

got pics smaller now thanks mike

slandis3 · « **Reply #46 on:** May 04, 2009, 20:04:21 »

Ok anyone else want to go in and make some more of these?I need a total of 6 people to go in on the ato to get free shipping. And 5 people to get the cheapest price on the kalk reactors. The otal prcie on the ato is $ 24 and the reactor is $18. Let me know .

jungliztkruger · « **Reply #47 on:** May 04, 2009, 21:26:24 »

i would actually like one of each. i tried the drip method but i actually ended up spending more time adjusting the drip rate than i did ever just topping off (go figure right).

jeremyt · « **Reply #48 on:** May 04, 2009, 21:57:48 »

im in on another ato. the other one works so nice. prob another reactor as well so cheap

slandis3 · « **Reply #49 on:** May 05, 2009, 10:26:21 »

Ok i have enought people that want the ato so we can get free shipping on the parts. I am going to ask that i get the money up front this time aroud so i dont have to pull it out of my bank account. As soon as i have all the money i will order the parts so far i have. If someone wants to send me the money via paypal thats fine just add the fee.

udjustin 2
jungliztkruger 1
jeremyt 1
slandis3 1
jjw2121 1

rayviv · « **Reply #50 on:** May 05, 2009, 12:09:32 »

I want one of each, Please. And are you inviting those of us to come and see how you set these up?
Ray

rayviv · « **Reply #51 on:** May 05, 2009, 12:12:49 »

PS also need to know price and info to Paypal.

jeremyt · « **Reply #52 on:** May 05, 2009, 13:50:45 »

Quote from: slandis3 on May 04, 2009, 20:04:21

Ok anyone else want to go in and make some more of these?I need a total of 6 people to go in on the ato to get free shipping. And 5 people to get the cheapest price on the kalk reactors. The otal prcie on the ato is $ 24 and the reactor is $18. Let me know .

as listed above ato $24 reactor $18

slandis3 · « **Reply #53 on:** May 05, 2009, 15:59:46 »

we need 1 more person to join in on the klak reactors so we will have enough people to use a 10' pc of pipe.

cyberwollf · « **Reply #54 on:** May 05, 2009, 19:18:20 »

I'll jump on for a reactor and ATO
Thats 24 and 18 for the unassembled parts?

jeremyt · « **Reply #55 on:** May 05, 2009, 19:36:47 »

Quote from: cyberwollf on May 05, 2009, 19:18:20

I'll jump on for a reactor and ATO
Thats 24 and 18 for the unassembled parts?

comes assembled just need to get maxi jet 1200s (or any other comparable pump), hose clamps and some 3/4 tube (see pics above)

slandis3 · « **Reply #56 on:** May 05, 2009, 20:35:02 »

yep ill put them together for everone. They are very easy to put together. $25 for the ato and $18 for the reactor.

We will now have enough people to make the reactors so when i get the money from everyone ill go buy all the stuff.

pm me to get m paypal info

cyberwollf · « **Reply #57 on:** May 05, 2009, 20:47:51 »

I assume you just have the powerhead on the relay to turn on and stir while you are toping off with another topoff pump?

I am using a little 500 gph pump for topoff, is there any reason I couldnt just use that pump in the bottom inlet and use it to stir without the need for the extra pump?

jeremyt · « **Reply #58 on:** May 05, 2009, 21:04:54 »

just get a timer for mixing, set for twice a day for 15 min. relay is on ato

slandis3 · « **Reply #59 on:** May 05, 2009, 21:56:36 »

Quote from: cyberwollf on May 05, 2009, 20:47:51

I assume you just have the powerhead on the relay to turn on and stir while you are toping off with another topoff pump?

I am using a little 500 gph pump for topoff, is there any reason I couldnt just use that pump in the bottom inlet and use it to stir without the need for the extra pump?

No the relay is used just for the top off. The float switch drops and turns on the pump to add water to the tank or reactor. I have my reactor pump set to come on twice a day to stir the kalk.I use a timer to have it come on an noon and midnight. If your up in my area you are more than welcome to come out and see how i have mine set up

slandis3 · « **Reply #60 on:** May 10, 2009, 19:50:01 »

last call for the ato. gonna order this stuff monday so far i have paid for ato and kalk reactor

jungliztkruger
jeremyt
slandis3
jjw2121
rayviv

slandis3 · « **Reply #61 on:** May 11, 2009, 17:13:39 »

ato parts ordered. i will start getting the kalk reactor parts this week

ohioreef · « **Reply #62 on:** May 12, 2009, 21:22:40 »

Mike,

What size thread did you use to tap the threaded holes for the input/output? I want to convert them to 1/4" fittings so I can run it off my Aqualifter pump.

slandis3 · « **Reply #63 on:** May 12, 2009, 21:36:20 »

ohioreef · « **Reply #64 on:** May 12, 2009, 21:58:03 »

Thanks

slandis3 · « **Reply #65 on:** May 14, 2009, 16:06:34 »

ok the stuff for the ato cam in today i will hopefully try to put them together next week. I will let everyone know when they are ready

jeremyt · « **Reply #66 on:** May 14, 2009, 16:20:34 »

if you need any help lmk

rayviv · « **Reply #67 on:** June 09, 2009, 14:50:47 »

Did I miss something here? Are the Reactors / ATOs finished?

jjw2121 · « **Reply #68 on:** June 09, 2009, 15:03:37 »

Slandis has been busy with work and said they hopefully will be done soon.

rayviv · « **Reply #69 on:** June 09, 2009, 15:07:31 »

Thanks; Theres no hurry but I thought I had just missed the pickup notice which would be like me to do.

slandis3 · « **Reply #70 on:** June 09, 2009, 16:19:53 »

yes sorry i have moved to a new position at work. Which included moving to dayshift. My new position is very demanding as I am next in leadership right under my new boss. It will take a little while to get use to. The ato's are done and i am working on the kalk reactors through out the week. I will post when they are done. Sorry for the delay

jjw2121 · « **Reply #71 on:** June 09, 2009, 16:21:46 »

I appreciate you doing this. Take your time.

slandis3 · « **Reply #72 on:** July 07, 2009, 18:01:32 »

ok now the kalk reactors are done. I just need to know what size tapped hole to put n the lid. So if your going to use a aqua lifter to feed it with i will tap it for a 1/4" pipe tap. If your going to use a power head/pump i will tap it for 1/2" npt please let me know this week if possible

jeremyt · « **Reply #73 on:** July 07, 2009, 23:43:39 »

maxi jet for me

jungliztkruger · « **Reply #74 on:** July 08, 2009, 00:18:50 »

aqualifter will work for me... will it be a JG speedfit?

slandis3 · « **Reply #75 on:** July 08, 2009, 06:11:53 »

ok i got you guys down. they will be done tonight.

slandis3 · « **Reply #76 on:** July 09, 2009, 21:29:55 »

reactors are done.

rayviv · « **Reply #77 on:** July 14, 2009, 08:41:22 »

Just picked up my ATO & reactor last nite at Slandis3s' house and wanted to comment on it.

The ato & reactor, are by definition, simple. (because I can understand them). But the Quality looks to be top of the line.

While there I got to look at his set-up. Which was very impressive! And then he showed me the polished alum. fixtures he did. I sure wish I could have gotten in on that deal. WOW

As I stood there and looked at all this I began to realize the potential of this mans creativity. I dont even think he realizes it. His tank display shows it and the stand shows it and the language of this man even shows. I was truly impressed and count it a privilege to have been there.

So having said all that I want to thank you Mike for taking the time to help me understand and for sharing your time with me.

Sincerely Appreciated, Raymond Norton

cyberwollf · « **Reply #78 on:** July 14, 2009, 22:51:08 »

I love the custom canner door cutouts and vent. Must be nice to have access to the waterjet.

lazylivin · « **Reply #79 on:** July 14, 2009, 23:34:25 »

I got to see Slandis's tank a couple months back and every aspect of it was awesome. Very well planned out with attention to all the details.

slandis3 · « **Reply #80 on:** July 15, 2009, 04:49:31 »

Thanks. I no longer have access to the water jet.

I took a new position in my company.But i could get some stuff ran if needed

cyberwollf · « **Reply #81 on:** July 21, 2009, 21:37:49 »

ITS ALIVE, ITS ALIVE!!! Finally got the maxijet and all the fitting set up. So the reactor is officially online.

I have dripped Kalk before and played around with 2 part, but I'm lazy, so this will be the first time I seriously attempt to keep good alk and cal levels. I have always had slow but steady growth, but we'll see what happends now

Thanks again for the labor and setting these up Mike. Although I had been wanting to do it for awhile, again I'm lazy

Thanks

jungliztkruger · « **Reply #82 on:** August 08, 2009, 22:14:57 »

havent gotten around to posting in a while.

this kalk reactor is a monster

it hasnt even been hooked up yet but it still is a boost to me ego to see it stand next to my tank.
when lonnie pulled it out of his truck my jaw about hit the pavement. i was at work so i had to explain that it was for calcium and not for other things that use tubular piping and hoses. one person even said "its so big"

-grins-

great job slandis

slandis3 · « **Reply #83 on:** August 09, 2009, 08:16:44 »

Im glad you like it.

jungliztkruger · « **Reply #84 on:** August 09, 2009, 11:27:15 »

by size alone it is a manly testament to my nerdiness in this hobby lol

now i just need to buy a few pumps and figure out how to hook it up

cyberwollf · « **Reply #85 on:** August 09, 2009, 17:51:59 »

Just got back into town from a week and half vacation. I can definately tell the difference in my tank when I got back. Thanks again Mike.

reefkeeper · « **Reply #86 on:** August 26, 2009, 23:01:02 »

Mike, if you get in the mood again, count me in for one. Thanks -Jeff

slandis3 · « **Reply #87 on:** August 27, 2009, 08:27:32 »

To make it easey we need 5 people to go in at once.

rayviv · « **Reply #88 on:** August 27, 2009, 12:29:14 »

And I'll have a two bulb highly polished reflective lighting unit!

LOL

2024 Ohio Reef Frag Swap

Author Topic: Diy kalk reactor. (Read 6997 times)

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3

slandis3