2024 Ohio Reef Frag Swap

2024 flyer

Author Topic: protein skimmer.........  (Read 1288 times)

0 Members and 1 Guest are viewing this topic.

duanesworld

  • Guest
protein skimmer.........
« on: January 18, 2008, 20:52:08 »
I am looking into getting a decent protein skimmer hang on style. Any suggestions everyone???  I have a 45 gallon tank if that helps any.


Thanks!!!!

Duane

Offline Secondgen

  • Lifetime Premium Member
  • *****
  • Posts: 1,372
Re: protein skimmer.........
« Reply #1 on: January 18, 2008, 21:16:33 »
I have a Remora that I am very happy with. I would definitely recommend.

Offline REDPYRO

  • Hey Everybody!
  • Posts: 1,446
  • Who did what now?
    • MrLevek Productions
Re: protein skimmer.........
« Reply #2 on: January 18, 2008, 21:20:12 »
hang on, sump...what are we looking at attachment wise?

duanesworld

  • Guest
Re: protein skimmer.........
« Reply #3 on: January 18, 2008, 21:21:24 »
Hang on aquarium.....no sump in this tank

MechanicalEngineer

  • Guest
Re: protein skimmer.........
« Reply #4 on: January 18, 2008, 22:32:14 »
I've heard the hang-on remoras are pretty good. 

You should just add a sump or a wet dry...and throw the tunze nano in there...I can't say enough good things about it & their customer service.   ;D

duanesworld

  • Guest
Re: protein skimmer.........
« Reply #5 on: January 18, 2008, 23:05:58 »
i have thought about that, but the only thing i can come up with is a 10 gallon aquarium for a refugium sump.......and not to sure on how to get that to work with out a possibility of it overflowing incase pump failure or power outtages.

MechanicalEngineer

  • Guest
Re: protein skimmer.........
« Reply #6 on: January 18, 2008, 23:39:40 »
I had a 10g on my 40g with no problems...through power failures and all.  You just have to make sure your baffles aren't too high...depends on where your overflow is.  My pump is a Mag 5 if I remember correctly. 

duanesworld

  • Guest
Re: protein skimmer.........
« Reply #7 on: January 19, 2008, 09:06:22 »
Do you have have the specs on your baffle placements and how high to make the baffles?   That is what has me at a loss at this time. I will take all the help i can get.

Thanks everyone, Duane

 

Powered by EzPortal