2024 Ohio Reef Frag Swap

2024 flyer
« previous next »
Pages: [1]   Go Down

Author Topic: Wanted to borrow: tin snips and riveter  (Read 1181 times)

0 Members and 1 Guest are viewing this topic.

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Wanted to borrow: tin snips and riveter
« on: March 13, 2010, 12:35:18 »
I need some reflectors so I am going to make some diy lumenarcs from solar tubes. Anyone have tin snips or riveter before I go buy one?
Logged
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz

Offline ghurlag

  • Lifetime Premium Member
  • Adult
  • *****
  • Posts: 997
Re: Wanted to borrow: tin snips and riveter
« Reply #1 on: March 13, 2010, 12:36:05 »
No, but you better make sure that you document this!
Logged

Offline reefkeeper

  • Juvenile
  • ***
  • Posts: 155
Re: Wanted to borrow: tin snips and riveter
« Reply #2 on: March 13, 2010, 13:46:25 »
I have both and you ar more than welcome to borrow them. -Jeff
Logged
Jeff
120g baby reef w/ 55g refug
Penn State & Steelers Fan

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Re: Wanted to borrow: tin snips and riveter
« Reply #3 on: March 13, 2010, 13:53:02 »
Quote from: reefkeeper on March 13, 2010, 13:46:25
I have both and you ar more than welcome to borrow them. -Jeff

of course you post as i'm walking out of harbor frieght  :laugh: they were both on sale, so under $10 total. Thanks for the offer Jeff
Logged
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz

Offline Wall_Tank

  • Administrator
  • Adult
  • *****
  • Posts: 3,754
Re: Wanted to borrow: tin snips and riveter
« Reply #4 on: March 13, 2010, 14:00:10 »
Quote from: cyberwollf on March 13, 2010, 13:53:02
of course you post as i'm walking out of harbor frieght  :laugh: they were both on sale, so under $10 total. Thanks for the offer Jeff

If you weren't so darn impatient to even let people read your post, I have a set too.  Right and Left Turning snips.   :)
Logged

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Re: Wanted to borrow: tin snips and riveter
« Reply #5 on: March 13, 2010, 14:04:07 »
I gave yall an HOUR!  :laugh: I was just gonna buy them from the start, but had sticker shock at lowes. I just got a cheap set of strait cut at harbor frieght. 
Logged
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz

Lost Floridian

  • Guest
Re: Wanted to borrow: tin snips and riveter
« Reply #6 on: March 13, 2010, 15:56:04 »
we don't all live on here like you do wes,  ::)

and we could have lent you the tools too.
Logged

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Re: Wanted to borrow: tin snips and riveter
« Reply #7 on: March 13, 2010, 16:01:25 »
Quote from: Lost Floridian on March 13, 2010, 15:56:04
we don't all live on here like you do wes,  ::)

and we could have lent you the tools too.

Yea I almost called you.  Like I said, I was planning on buying them for keep, was just shocked by Lowes' price and posted a borrow.  Then thought about stopping at harbor freight on the way home.  Man yall are mean  :'( See if i ever ask to borrow anything again  ;D ;D  (J/K becuase im sure i will ask again in the future  ;D)
Logged
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz

Offline ghurlag

  • Lifetime Premium Member
  • Adult
  • *****
  • Posts: 997
Re: Wanted to borrow: tin snips and riveter
« Reply #8 on: March 13, 2010, 17:28:17 »
Wes isn't impatient, he's zealous :)
Logged

Reefd Up

  • Guest
Re: Wanted to borrow: tin snips and riveter
« Reply #9 on: March 13, 2010, 19:44:07 »
Don't let Will fool you. He doesn't have those tools, I do. And no, in marriage, the tools don't become part of 'we' own it. :) hehe
Logged

Offline Todd W.

  • Adult
  • ****
  • Posts: 901
Re: Wanted to borrow: tin snips and riveter
« Reply #10 on: March 13, 2010, 20:19:39 »
Ha....

Ohhhhh shiny thing... I want it....

Ohhhhh shiny thing.....

Ohhhhh shiny....

Sounds like some of my R&D people at work....
Logged

Offline HUNGER

  • Posts: 4,551
Re: Wanted to borrow: tin snips and riveter
« Reply #11 on: March 13, 2010, 23:14:37 »
i have a set to
Logged
SIZE DOES MATTER

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Re: Wanted to borrow: tin snips and riveter
« Reply #12 on: March 14, 2010, 01:21:56 »
Well I might actually have to borrow a pair lol after about 70 rivets this one seems worn out.  It just wont grab the rivets anymore.  They just slip when i squeeze it.  I think I am going back to harbor frieght and see if they'll exchange it. (i know its crap, but they should at least finish my project lol)
Logged
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz

Offline HUNGER

  • Posts: 4,551
Re: Wanted to borrow: tin snips and riveter
« Reply #13 on: March 14, 2010, 10:52:53 »
if u got them from harber frieght u can take them back and get new ones
Logged
SIZE DOES MATTER
Pages: [1]   Go Up
« previous next »
 

Powered by EzPortal