Welcome,
Guest
. Please
login
or
register
.
April 29, 2024, 02:59:46
Home
Forum
Help
Login
Register
Ohio Reef
»
Forum
»
Reef Discussion
»
Do It Yourself
»
Autodesk Inventor
2024 Ohio Reef Frag Swap
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Autodesk Inventor (Read 2440 times)
0 Members and 1 Guest are viewing this topic.
UDJustin
Adult
Posts: 935
Autodesk Inventor
«
on:
January 28, 2009, 23:50:13 »
So I have been wanting to get a calcium reactor and I have seen plenty of DIY designs out on the web... being that I work at Aquariums Etc. Joel has a reactor there that I happened to look at and grab a few quick measurements off of. So I have been trying to throw a design together and this is my start I guess its not done by any means but I thought I would post a pic up that i took with my cell phone. I dont think the site would support inventor files so this is why I posted the pic from my cell phone.
Logged
If you didn't know I'm kind of a big deal...
cyberwollf
2010 FragSwap Chairman
Posts: 3,268
Re: Autodesk Inventor
«
Reply #1 on:
January 29, 2009, 08:01:28 »
You can also do a print screen (Fn + insert. on my laptop) paste it in MSPaint or something and save JPG
Logged
75G Mixed Reef w/ 30G sump/refuge
Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz
Print
Pages: [
1
]
Go Up
« previous
next »
Ohio Reef
»
Forum
»
Reef Discussion
»
Do It Yourself
»
Autodesk Inventor
Powered by
EzPortal