2024 Ohio Reef Frag Swap

2024 flyer

Author Topic: 46 Galon Bowfront build  (Read 7815 times)

0 Members and 1 Guest are viewing this topic.

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Re: 46 Galon Bowfront build
« Reply #25 on: December 20, 2008, 21:06:11 »
does one of the overflows have a siphon break or are they all siphon?
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz


Offline lightningfront

  • Adult
  • ****
  • Posts: 307
Re: 46 Galon Bowfront build
« Reply #26 on: December 20, 2008, 22:57:26 »
does one of the overflows have a siphon break or are they all siphon?

Yes on one of the drains there will be a hole drilled into the cap on top, and an airline tube run from there back into the overflow just above the waterline.

The center one is a full siphon, the left is the secondary drain, and the right an emergency overflow.
28 NanoCube CF Quad

My tank thread
http://www.ohioreef.com/index.php?topic=8341

Offline lightningfront

  • Adult
  • ****
  • Posts: 307
Re: 46 Galon Bowfront build
« Reply #27 on: December 20, 2008, 23:32:01 »
Overflw box glued and sealed to the tank.



Drain plumbing finished.



28 NanoCube CF Quad

My tank thread
http://www.ohioreef.com/index.php?topic=8341

Offline UD Flyer

  • Adult
  • ****
  • Posts: 649
Re: 46 Galon Bowfront build
« Reply #28 on: December 21, 2008, 08:47:19 »
Looks good

If the sump has a leak or something of the sort, how do you plan on getting it out?

quicksilver

  • Guest
Re: 46 Galon Bowfront build
« Reply #29 on: December 21, 2008, 09:17:44 »
very nice keep up the good work.

Bigmoo

  • Guest
Re: 46 Galon Bowfront build
« Reply #30 on: December 21, 2008, 10:19:42 »
Details, details.... Looks very nice though. Really like the background color.

Offline jake

  • Adult
  • ****
  • Posts: 449
Re: 46 Galon Bowfront build
« Reply #31 on: December 21, 2008, 10:47:22 »
A hammer and saw all :)

Nice man it looks tight. I like the plumbing like art ,but for fish geeks

Offline cyberwollf

  • 2010 FragSwap Chairman
  • Posts: 3,268
Re: 46 Galon Bowfront build
« Reply #32 on: December 21, 2008, 11:28:51 »
I was reading a thread on RC about that overflow setup.  I am going to try it on my next build.  Question about the box: Does anyone else run one without teeth (cutting teeth in glass would suck)?  More problems with fish flowing into the box?  I have seen a jig with a dremel tile cutting bit that might work if you wanted teeth
75G Mixed Reef w/ 30G sump/refuge

Electrical Engineers do it on impulse, with faster rise times, with more power, and less resistance at higher frequencies, without shorts, until it Hertz


Offline jake

  • Adult
  • ****
  • Posts: 449
Re: 46 Galon Bowfront build
« Reply #33 on: December 21, 2008, 15:46:54 »
Put some egg crate or sponge on the top of it

Offline lightningfront

  • Adult
  • ****
  • Posts: 307
Re: 46 Galon Bowfront build
« Reply #34 on: December 21, 2008, 16:52:47 »
Ya there is only a 1/2 inch or so inbetween the top of the box and the glass lid that will be on the tank. If I find fish are getting into the box I will add some kind of strainer to keep them out.
28 NanoCube CF Quad

My tank thread
http://www.ohioreef.com/index.php?topic=8341

Offline lightningfront

  • Adult
  • ****
  • Posts: 307
Re: 46 Galon Bowfront build
« Reply #35 on: December 21, 2008, 22:59:41 »
Excitement ;D Filled with tap water and checked everything out. All is good and the overflow works flawlessly and silently. Drained and have started to fill with RO/DI. Could take a while I only have a 50gpd RO/DI.

28 NanoCube CF Quad

My tank thread
http://www.ohioreef.com/index.php?topic=8341

Offline Joel

  • Adult
  • ****
  • Posts: 1,384
Re: 46 Galon Bowfront build
« Reply #36 on: December 22, 2008, 07:59:43 »
Ya there is only a 1/2 inch or so inbetween the top of the box and the glass lid that will be on the tank. If I find fish are getting into the box I will add some kind of strainer to keep them out.

A piece of egg crate trimmed to snugly fit inside the o/f box flush with the top of it, works pretty well at keeping most fish out. Snails are really bad about getting into un-screened o/f boxes and end up getting into & blocking the drain tubes. Super cheap, easy way to prevent this.

Looks good BTW...Congrats....Joel

Offline lightningfront

  • Adult
  • ****
  • Posts: 307
Re: 46 Galon Bowfront build
« Reply #37 on: December 26, 2008, 00:06:35 »
Managed to get it the rest of the way filled and salt added. Just waiting for the water to clear up. I'm gonig to go tomorrow and pick up some of the tonga branch rock at a LFS and some live rock with christmas money and get things started.

28 NanoCube CF Quad

My tank thread
http://www.ohioreef.com/index.php?topic=8341

Offline lightningfront

  • Adult
  • ****
  • Posts: 307
Re: 46 Galon Bowfront build
« Reply #38 on: December 28, 2008, 01:40:28 »
Picked up some tonga branch and some live rock.



First corals, Thanks Jake.





28 NanoCube CF Quad

My tank thread
http://www.ohioreef.com/index.php?topic=8341

Offline lazylivin

  • Administrator
  • Adult
  • *****
  • Posts: 11,471
Re: 46 Galon Bowfront build
« Reply #39 on: December 28, 2008, 01:42:12 »
Got to love new tanks, So clean and algae free!

Offline jake

  • Adult
  • ****
  • Posts: 449
Re: 46 Galon Bowfront build
« Reply #40 on: December 28, 2008, 11:44:20 »
Looks like they opened up pretty good. Nothing a hammer cant fix right. I just need a band saw now

Offline Arcade_Guy

  • Juvenile
  • ***
  • Posts: 224
  • Centipede
Re: 46 Galon Bowfront build
« Reply #41 on: January 08, 2009, 04:22:16 »
lookin good man. the tonga adds a nice touch.

just need some frogspawn in there now right? lol
55 Gallon Reef - Hamilton, OH 45013


Arnold shares his deepest feelings



 

Powered by EzPortal